Rust-Oleum Multi-Purpose Pressure Wash Concentrate
Rust-Oleum Multi-Purpose Pressure Wash Concentrate
Overview
Overview
Description
Description
Specification
Specification
| Global Product Type | Multipurpose Cleaners |
| Application | Outdoor Surface Cleaner |
| Applicable Material | Brick; Cement Block; Concrete; Driveways; Gutters; Masonry; Roofing; Siding |
| Chemical Compound | Proprietary Blend of Detergents; Foaming Surfactants; Dye |
| Physical Form | Liquid |
| Product Packaging | Jug |
| Volume Capacity | 1 gal |
| Product Biodegradability Indicator | N |
| Product Biodegradability in Days | 0 |
| Product Compostability Indicator | N |
| Pre-Consumer Recycled Content Percent | 0% |
| Post-Consumer Recycled Content Percent | 0% |
| Total Recycled Content Percent | 0% |
Manufacturer:Rust-Oleum Corporation
Manufacturer Part Number:352251
Manufacturer Website Address:http://www.rustoleum.com
Brand Name:Rust-Oleum
Product Line:Professional
Product Name:Multi-Purpose Pressure Wash Concentrate
Packaged Quantity:1 Each
Product Type:Multipurpose Cleaner
Cleaner Type:Concentrate
Cleaner Form:Liquid
Cleaner Volume:128 fl oz (4 quart)
Composition:
- Detergents
- Foaming Surfactants
- Dye
pH:12.5 - 13.5
Recommended Use:
- Grease Remover
- Grime Remover
- Mold Remover
- Oil Remover
- Fungi Remover
- Algae Remover
- Stain Remover
- Mildew Remover
Directions/Instructions:
DIRECTIONS - MANUAL APPLICATION
Always test on an inconspicuous area first. Rinse surrounding vegetation with water before and after application.
1. Rinse surface with water.
2. Dilute concentrate 1:19 in a pump-up sprayer (approximately 7 oz. of concentrate with 1 gallon of water).
3. Working in small sections, apply solution to surface with a soft bristle brush or pump-up sprayer.
4. Wait 3-5 minutes. Do not allow solution to dry on surface.
5. With hose at highest pressure, rinse surface with water.
6. Move to new section and repeat steps 1-5.
DIRECTIONS - PRESSURE WASHER APPLICATION
Always test on an inconspicuous area first. Rinse surrounding vegetation with water before and after application.
1. Rinse surface with water.
2. Place detergent application siphon tube and screen filter directly into solution. Open meter valve (if applicable) for maximum product flow. For reservoir machines, pour concentrate (full strength) directly into pressure washer.
3. Working in small sections, apply solution to surface using low pressure spray nozzle. For vertical surfaces, apply bottom to the top.
4. Wait 3-5 minutes. Do not allow solution to dry on surface.
5. Remove siphon tube from solution and rinse surface from top to bottom with high pressure.
6. Move to new section and repeat steps 1-5.
7. Before storage, rinse pressure washer parts thoroughly with water.
Application/Usage:
- Multipurpose
- Multi Surface
Features:
- Fast Acting
- Bleach-free
- Scrub-free
- Anti-corrosive
Color Family:Purple
Product Color:Purple
Recycled:No
Post-consumer-waste%:0%
Assembly Required:No
Country of Origin:United States
