Vectra® ProX Floor Finish saves time while giving floors diamond-like brilliance, clarity and durability.

• Dirt Remover
• Scratch Remover
• Black Mark Remover
• Scuff Mark Remover

• Blockade areas to be stripped or finished. Position wet-floor signs around area to be cleaned.
• Strip floor using recommended Diversey brand stripper according to label directions

Coating

• Apply 2-3 uniform coats using a clean finish mop or the TrailBlazerTM/MC Floor Finish Applicator System. Apply additional coats until desired gloss is obtained.
• Allow 30 minutes drying time between coats. Temperature, humidity and ventilation may affect drying time. Allow finish to cure for 24 hours before buffing.

Maintenance

• Dust mop or sweep
• Clean the floor with a mop or an automatic scrubber using the recommended Diversey brand cleaner following label directions
• If desired, spray buff using recommended Diversey brand floor maintainer to enhance gloss

Recoating

• Dust mop or sweep
• Deep scrub floor using Diversey cleaner according to label directions
• Blockade area and apply 1-2 uniform coats of finish using a clean finish mop or the Diversey TrailBlazerTM/MC Floor Finish Applicator System. Allow finish to cure for 24 hours before buffing.

Removal

• Remove using recommended Diversey brand stripper according to label directions

Best Results

• Do not dilute
• Do not use on surfaces colder than 50°F (10°C) @ 15% RH
• To avoid contamination, do not return unused product to original container

Note: Floors will be slippery when wet or contaminated with foreign materials. Promptly clean-up spills and foreign materials. Meets ASTM D2047 requirements for slip resistance.

• Hard Floor
• Polished Surface
• Glazed Surface
• Ceramic Tile Floor

• Durable
• Slip Resistant
• Odor Resistant
• Low VOC